董军, 刘旭红, 姚顺忠, 李慧峰. 基于虚功原理表达的空间梁单元刚度矩阵分析[J]. 西南林业大学学报, 2002, 22(4): 59-62. DOI: 10.11929/j.issn.2095-1914.2002.04.018
引用本文: 董军, 刘旭红, 姚顺忠, 李慧峰. 基于虚功原理表达的空间梁单元刚度矩阵分析[J]. 西南林业大学学报, 2002, 22(4): 59-62. DOI: 10.11929/j.issn.2095-1914.2002.04.018
DONG Jun, LIU Xu-hong, YAO Shun-zhong, LI Hui-feng. Analysis of Element Stiffness Matrix About Space Beam-Element Based on Principle of Virtual Work[J]. Journal of Southwest Forestry University, 2002, 22(4): 59-62. DOI: 10.11929/j.issn.2095-1914.2002.04.018
Citation: DONG Jun, LIU Xu-hong, YAO Shun-zhong, LI Hui-feng. Analysis of Element Stiffness Matrix About Space Beam-Element Based on Principle of Virtual Work[J]. Journal of Southwest Forestry University, 2002, 22(4): 59-62. DOI: 10.11929/j.issn.2095-1914.2002.04.018

基于虚功原理表达的空间梁单元刚度矩阵分析

Analysis of Element Stiffness Matrix About Space Beam-Element Based on Principle of Virtual Work

  • 摘要: 考虑任意空间梁单元存在6个广义结点位移向量的一般情况,从虚功原理出发,严格地推导了空间梁单元刚度矩阵的表达式。所得到的结果与文献中其他方法导出的结果一致,补充了相关文献对空间梁单元刚度矩阵的论述。

     

    Abstract: According to the principle of virtual work,the formulae of element stiffness matrix about space beam-element have strictly been deduced while considering that there are six generalized node displacements for arbitrary space beam.The deduced results are consistent with references,which show that all formulae in this paper are correct,and supplementary for references.They provide some basic theory for further engineering applications.

     

/

返回文章
返回