李玮, 董军, 蔡邦智. 数控加工工艺过程分析与处理探索[J]. 西南林业大学学报, 2003, 23(1): 84-87. DOI: 10.11929/j.issn.2095-1914.2003.01.022
引用本文: 李玮, 董军, 蔡邦智. 数控加工工艺过程分析与处理探索[J]. 西南林业大学学报, 2003, 23(1): 84-87. DOI: 10.11929/j.issn.2095-1914.2003.01.022
shu
LI Wei, DONG Jun, CAI Bang-zhi. The Analyzing and Handling of Numerical Control Technology Process[J]. Journal of Southwest Forestry University, 2003, 23(1): 84-87. DOI: 10.11929/j.issn.2095-1914.2003.01.022
Citation: LI Wei, DONG Jun, CAI Bang-zhi. The Analyzing and Handling of Numerical Control Technology Process[J]. Journal of Southwest Forestry University, 2003, 23(1): 84-87. DOI: 10.11929/j.issn.2095-1914.2003.01.022
shu

数控加工工艺过程分析与处理探索

The Analyzing and Handling of Numerical Control Technology Process

    摘要
  • 摘要: 通过研究和分析数控编程中要确定的各种加工参数和工艺内容,讨论了在控加工时进行工艺分析和确定工艺参数的方法。并以相应的实例解释了具体完成各项工作的正确方向。

     

    Abstract: All kinds of process parameters and technology contents are ascertained by the research and analysis in numerical control program,and the method of technology analysis and setting up technology parameters in numerical control process are discussed in detail.An example is taken to explain the positive direction when the authors carry on all kinds of tasks,thus providing some technique reference for numerical control process operators and programmers.

     

    • HTML全文
    • 参考文献(0)
    • 相关文章
    • 施引文献
  • 资源附件(0)

/

返回文章
返回