TH 6350卧式加工中心主轴系统试验模态分析

崔涛; 周新民; 杨理诚; 杨灿宇

doi:10.11929/j.issn.2095-1914.2004.01.016

崔涛, 周新民, 杨理诚, 杨灿宇. TH 6350卧式加工中心主轴系统试验模态分析[J]. 西南林业大学学报, 2004, 24(1): 62-65. DOI: 10.11929/j.issn.2095-1914.2004.01.016

引用本文:

崔涛, 周新民, 杨理诚, 杨灿宇. TH 6350卧式加工中心主轴系统试验模态分析[J]. 西南林业大学学报, 2004, 24(1): 62-65. DOI: 10.11929/j.issn.2095-1914.2004.01.016

CUI Tao, ZHOU Xin-min, YANG Li-cheng, YANG Chan-yu. The Experimental Module Analysis of Main Shaft System[J]. Journal of Southwest Forestry University, 2004, 24(1): 62-65. DOI: 10.11929/j.issn.2095-1914.2004.01.016

Citation:

CUI Tao, ZHOU Xin-min, YANG Li-cheng, YANG Chan-yu. The Experimental Module Analysis of Main Shaft System[J]. Journal of Southwest Forestry University, 2004, 24(1): 62-65. DOI: 10.11929/j.issn.2095-1914.2004.01.016

TH 6350卧式加工中心主轴系统试验模态分析

The Experimental Module Analysis of Main Shaft System

摘要

摘要: 对TH6350卧式加工中心主轴系统进行伪随机相对激振试验,分析其薄弱模态和主振部件,提出结构改进意见.

Abstract: Pseudorandom relative excitement experiment to main shaft system of the TH 6350 horizontal machine tool was done.The weak module and the main vibration parts were studied and countermeasures for improvement were put forward.

HTML全文

参考文献(0)

资源附件(0)

/